Daedalus Magpie V2, Руководство пользователя

Страница: 14 / 28

12
To access the Speed Controller menu, put the direction switch in the
neutral (middle) position. Press the Start/Stop button and make sure
it shows a speed percentage number. Press Menu to see option No.1,
and press Menu again to reach the next option. There are five total
options. Adjust each menu option by using the Up/Down arrows.
Press the Start/Stop button to save changes and exit the menu at any
time. Here are the five menu selections:
1) 030 Start time delay, in tenths of a second. This shows a 3-second
delay, though the full range is 0-10 seconds. (Keep the start
delay low to get the wheel up to speed quickly, or increase
it for a slower start. If you feel the yarn is being yanked from
your hand when the wheel starts, increase this value.)
2) 030 Stop time delay, in tenths of a second. This shows a 3-second
delay. Again, the actual range is 0-10 seconds. A setting of
2.060 would be a longer, 6-second delay. (5-7 seconds seems
right for high-speed plying on a laden bobbin, though your
mileage may vary.) If you’re getting backlashing, where the
yarn feeds back off the bobbin during a stop, increase this
value just until the backlashing stops.
Speed Controller Menu
Evanita Montalvo, James Perry, and Suzy Brown