7
before You Call for Service
PRobLeM
MAY be CAuSed bY
WHAT To do
nothing Works. Control panel is not lit.
Blower does not work.
Power to hood is off.
turn on power at junction or fuse
box. Check for tripped breaker or
blown fuse.
Hood main power switch is off.
Make sure hood main power switch is
on (see page 3).
Power outage.
Call electric company.
Hood not connected to electric
power.
Have qualified electrician connect
hood to electric power.
Light does not work. Control panel is
not lit.
See Nothing Works above.
Light does not work. Control panel is
lit.
Loose light bulb.
Check to make sure that both prongs
on the light bulb are inserted into the
holes on the light socket (see
page 6).
Light bulb burned out.
Replace light bulb (see page 6).
Blower does not draw heat and smoke
properly.
filters clogged or dirty.
Check filters. Make sure they are
completely clean and not blocked by
foreign objects.
Blower set to low setting.
See Operating Instructions sec-
tion.
Damper jammed shut or duct work
clogged.
Consult with a qualified installation
professional.*
Blower shuts off by itself after being
left on for a long time.
normal operation.
to conserve energy, the blower auto-
matically turns itself off if it is left on
for four hours continuously.
Blower does not work. Control panel
not lit.
See Nothing Works above.
Blower does not work. Control panel
lit.
Blower malfunction.
Call for service.
* the duct work connected from the range hood chimney to outside the house or building required to vent heat and
smoke is not manufactured, warranted or serviced by Dacor. The customer is responsible for having a qualified installer
install and maintain the duct work.
