6
Cleaning and Maintenance
Maintenance
warning
to prevent electric shock turn off the main power
•
switch before replacing the light bulb.
to avoid personal injury, make sure the cooktop
•
or range, the hood and the light are cool before
changing the light bulb.
lIGHt BulB rePlaCement
Light bulb replacement is considered to be a homeowner
maintenance operation. If the light does not work, before
replacing it, check to make sure that the main circuit
breaker (or fuse) and the main power switch on the hood
are on.
Replace the light bulb only with Dacor Part no. 101945,
available from any authorized Dacor parts dealer.
turn off the main power switch, located next to the
1.
light.
Reach up into the hood and pry the edge of the lens
2.
loose with a flat blade screwdriver, or disposable plas
-
tic knife. If using a flat blade screwdriver, cover the
end with tape to avoid damage to the metal surfaces.
Once the light bulb is loose, pull down on it with a
3.
gentle rocking motion until it pulls free.
Line up the prongs on the new light with the holes
4.
in the light socket. If there are more than two holes,
insert the prongs into the center two holes. You may
need a flashlight to see inside the opening.
gently push up on the new light until it stops.
5.
turn on the main power switch. touch the light key to
6.
make sure it is working.
rePlaCement Parts
DaCor Part #
DesCrIPtIon
101945
Light bulb
101951
filter (two per unit)
