6
PMOR30B
PMOR30R
PMOR30S
OPERATION
DESCRIPTION OF OPERATING SEQUENCE
CONTROL PANEL
The following is a description of component functions during
oven operation.
OFF CONDITION
Closing the door activates the stop switch, primary interlock
switch and secondary interlock switch. (In this condition, the
monitor switch contacts are opened.)
When oven is plugged in, 120 volts A.C. is supplied to the
control unit (Figure O-1).
1. "Set clock" key and "Video demo" key will be appeared
on the touch screen.
2. Touch "Set clock" key and set the clock referring to the
operation manual.
NOTE: If no keys are touched within 30 seconds, the touch
screen will go on to the Video Demo mode. To
cancel the Video Demo mode, touch the STOP/
CLEAR pad. And then set the clock.
3. The touch screen will show the home page after setting
the clock.
4. The following is an example of the Home page when
the time of the day is set to 12:30 p.m..
NOTE: Even if the clock is not set, the display will show the
Home page by touching the STOP/CLEAR pad
within 30 seconds after being plugged in.
COOKING CONDITION
Program desired cooking time touching the NUMBER pads.
When the START pad is touched, the following operations
occur:
Minute
Plus +
Kitchen
Timer
12 : 30 PM
1
2
3
4
5
6
7
8
0
9
NOTE:
The directed features are disabled after three minutes when the oven is not in use. These features are
automatically enabled when the door is opened and closed or the STOP/ CLEAR pad is pressed.
