Dacor Millennia EDW24, Инструкция по использованию и уходу

Страница: 15 / 28

13
Adding a Dish After You Start
you can add a dish, if needed, after starting your dishwasher.
Dacor recommends that you only add items during the first five
minutes of operation to make sure they get clean.
to add a dish:
open the door. the dishwasher will stop operating. 1.
wait a moment for the steam to clear. 2.
without touching any of the hot surfaces or racks, insert the 3.
item into one of the racks, following normal loading instruc-
tions.
close the door.
4.
push on the door handle to make sure that the door is com- 5.
pletely shut. after a short pause, operation will resume.
Stopping Your Dishwasher During
Operation
to stop the current cycle and drain your dishwasher:
open the door. the dishwasher will stop operating. 1.
press 2. start/CanCel .
close the door. after a short pause, you will 3.
hear the water in the dishwasher begin to drain.
once the water is drained, the dishwasher will
turn off.
The Hi-Temp Feature
If you want to wash at a high temperature for maximum
grease and grime removal:
open the door. 1.
press one of the wash cycle buttons on the control panel. 2.
press 3. Hi-temp . the Hi-tem p button will light
(pressing Hi-temp a second time will turn it off
again).
press
4. start/CanCel .
close the door. after a short pause, the dish- 5.
washer will start.
important
Hi-temp cannot be selected with the rinse cycle.
things to Know about the Hi-temp Feature
the • Hi-temp feature may increase the wash cycle time.
Ho • may appear on the display while the dish-
washer heats the water for the high tempera-
ture wash.
in addition, you can select the
• sanitize fea-
ture also by pressing the sanitize button before pressing
start/CanCel .
Starting Your Dishwasher
caution
if the dishwasher drain line is connected to a garbage disposal,
run the disposal and make sure it is completely empty before
starting the dishwasher.
important
see the Getting to Know Your Dishwasher section for a
description of the various wash settings.
To wash or rinse the dishes:
make sure you have loaded the dishwasher and that the 1.
detergent and rinse aid dispensers are filled according to the
previous pages.
For best oper
2. ation, clear the house pipes of cold water by
running a nearby faucet until the water is hot.
open the door.
3.
press one of the wash cycle buttons or the 4. rinse button on
the control panel unti l it lights.
press 5. start/CanCel . the start/
CanCel button will light and the
display will show Cl (meaning “close
the door”).
close the door.
6.
push on the door handle to make sure that the door is com- 7.
pletely shut. after a brief pause, the dishwasher will start.
when the wash or rinse cycle is completed, the chime will
8.
sound.
While the dishwasher is operating:
the dishwasher starts each cycle by draining any water at •
the bottom of the wash tub.
You may hear the bottom of the tub fill with clean water and •
the pulsating sound of water spraying on the dishes and the
tub walls.
The number of tub drains and fills and the amount of •
spraying depends on the wash or rinse cycle selected. the
dishwasher may appear to pause from time to time while it
is heating water to a higher temperature.
During the wash/rinse cycle, the control panel buttons are
•
not lit.
if you open the door during the wash cycle, the dishwasher
•
will stop operating. when you close the door, it will continue
with the current cycle (after a short pause) until it is done.
Operating Your Dishwasher