32
MMDV30S
MMDH30S
AUTO DRAWER GEAR REMOVAL
. Follow the Microwave Drawer disassembly as previously stated
2.
Open the drawer and keep it open.
3. To discharge the high voltage capacitor, wait for 60 seconds.
4. Unhook wiring Auto Drawer Gear
.
5. Remove the (4) screws holding the auto drawer gear to the bottom cavity angle
(Fig. G-1)
.
5. Pull drawer gear from cavity angle.
6. The drawer gear is now free.
7. Proceed in reverse to reinstall the Auto Drawer Gear taking care that the gear teeth are set into
the cavity angle correctly.
Fig. G-1
RACK GEAR REMOVAL
. Follow the Microwave Drawer disassembly as previously stated
2.
Open the drawer and keep it open.
3. To discharge the high voltage capacitor, wait for 60 seconds.
4. Remove the Microwave Drawer by following steps , 2, 5, 8, 9 & 0 as instructed under
"DRAWER ASSEMBLY AND CHOKE REMOVAL".
5. Remove the (3) screws holding the Rack Gear to the bottom slide rail
(Fig. G-2)
.
7. Proceed in reverse to reinstall the new Rack Gear.
Fig. G-2
