Dacor IHL42, Руководство по установке

Страница: 4 / 8

Page 2
21"
(533mm)
4" (102mm)
"A"
Model "A"
IHL30 27" (686mm)
IHL36 33" (838mm)
IVS1 Mounting
studs (typ)
IVS1 Power Pack
IHL Mounting
hole (typ)
STEP 1
Installation Planning
The Dacor Integrated Hood Liner (IHL) is constructed with non-combustible stainless steel material. The IHL dimensions and installation
design technique makes this an excellent component for any custom hood structure. In addition Dacor offers two Power Pack products (IVS1
and IVS2) which conveniently install on the pre-mounted installation lugs around the Power Pack opening at the top of the hood liner.
Plan the installation so that all minimum clearances are met or exceeded. Dimensions shown provide minimum clearances, unless otherwise
noted.
Figure 1:
IHL30/36 Overall Dimensions
Top View
NOTES:
1. Dacor Integrated Hood Liners have no electrical parts.
2. If utilizing Dacor Power Packs follow all electrical requirements listed within the Power Pack
installation instructions.
3. The Integrated Hood Liner has been designed for vertical on center ducting applications only.
4. For proper installation of the complete IHL/IVS custom hood ventilation system the installer
must follow the IVS Power Pack planning and installation information noted in the IVS
installation instructions.
21"
(533mm)
4" (102mm)
"B"
Model "B"
IHL42 39" (991mm)
IHL48 45" (1143mm)
IHL54 51" (1295mm)
IVS2 Mounting
studs (typ)
IVS2 Power Pack
IHL Mounting
hole (typ)
Figure 2:
IHL42/48/54 Overall Dimensions
Top View
NOTE:
The IHL30 and IHL36 liners are designed
for installation with the 600CFM
IVS1 Power Pack. For additional
specifications refer to the IVS planning
guide or installation instruction.
NOTE:
The IHL42, IHL48 and IHL54 liners
are designed for installation with
the 1200CFM IVS2 Power Pack.
For additional specifications
refer to the IVS planning guide or
installation instruction.