11
Door Removal
Remove the door to make the range easier to move during
the installation process.
WARNING
•
Do not attempt to disengage the hinge catches with
the door removed from the oven. The hinge springs
could release causing personal injury.
•
Do not lift or carry the oven door by the door handle.
1. Open the door to its fully opened position.
2. Use a flat blade screwdriver to rotate the catch over the
retaining arm on both hinges.
3. Lift the oven door to about a 15° angle from the vertical
position.
4. Hold the door with both hands just below the handle.
Pull the door up and away from the oven.
Door Gripping Points
Installation Instructions
Adjust the Range Height
1. For stand alone configurations, raise the range until
the top of the trim around the cooktop is at least
the same height as the countertop. For self-rimming
configurations, raise the range until the bottom of
the trim surrounding the cooktop is even with the
countertop. To adjust the height, turn the foot on the
bottom of each leg as shown below.
2. Use a level to make sure that the range does not tilt
front to back or side to side. Re-adjust the legs as
necessary.
up
down
Retaining arm
Catch
NOTE:
Handle
style varies
