English 35
Elec
tric o
v
en
Green cleaning
For light cleaning, the Green-cleaning function saves time and energy. For heavier
duty cleaning, use the self-cleaning function.
To perform the green cleaning cycle
1.
Make sure the oven door is unlocked
and closed completely.
2.
Turn the mode and temperature
selector knobs to the
OFF
position. Turn
the mode selector knob from
OFF
to the
Clean
position.
3.
Press
<
,
>
to select Green Cleaning
mode. Press
OK
to start Green Cleaning.
4.
When the operation is complete, the
display will blink and a beep will sound.
5.
Press
OFF
.
6.
Clean the oven’s interior.
There will be a significant amount
of water remaining on the bottom of
the oven after a green-cleaning cycle.
Remove the residual water with a
sponge or soft dry cloth.
Mode Selector Knob
Clean Mode
Green
You can cancel Green Cleaning at any time by setting the mode selector knob to
the
OFF
position.
To cancel the self-cleaning cycle
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in
the oven. To turn off the self-cleaning cycle, turn both the mode and temperature
selector knobs to the
OFF
position. The cycle turns off, but the door remains locked
until the oven temperature falls below 400 °F (205 °C).
After self-cleaning
•
The door stays locked until the internal oven temperature falls below 400 °F.
•
When the oven has cooled down, wipe the oven surfaces with a cloth to
remove ash residue.
•
Stubborn stains can be removed using a steel-wool pad. Lime deposits can be
removed using a vinegar-soaking cloth.
•
If you are not satisfied with the cleaning results, repeat the self-cleaning cycle.
•
The oven will not let you repeat a self cleaning cycle immediately You must
wait 2 hours before running self-cleaning again.
CAUTION
Do not attempt to open the oven door immediately after the self-cleaning cycle is
complete. The oven is still very hot when the door unlocks. Escaping hot air and/or
steam could burn you.
DOP36P86DLS_DA_DG68-01105E-00_EN+MES+CFR.indb 35
2020-07-06 오후 3:53:47
