English
5
Important safety instructions
WARNING
•
Follow t
he information in this manual
precise
ly to avoid fire or electrical
shock that
may cause property damage, personal injury, or death.
•
En
sure
the oven
is properly installed and grounded by a
qualified technician.
•
New branch-circuit installations (1996 NEC), mobile homes,
RV
s,
or installations
where local codes prohibit grounding through the neutral conductor
,
require 4-wire
branch-circuit connection.
•
Improper connection of aluminum house wiring to copper leads can
cause
an
electrical
/fire
hazard. Use only connectors designed for joining copper to
aluminum
,
and follow the manufacturer’s recommended procedure.
•
Mounting screws must be used
to secure the oven so it cannot be shifted/dislodged
.
CAUTION
•
The cabinets and wall coverings around the oven must be able to withstand the heat
[
up to 194 °F
(
90 °C)
]
generated by the oven.
•
D
o
NOT remove
the
spacers
from the oven's left/right sides
. The spacers center the
oven in
the
cabinet cutout
so
heat
does not build up in one area and
damag
e
the
cabinetry or caus
e
a fire hazard
.
IMPORTANT NOTE
The installer shall ensure proper installation.
The warranty does NOT cover p
roduct
failure due to improper installation.
WARNING
D
o
NOT put weight on the oven door
or
let anyone climb, sit, stand, or hang on
it
. The
door
could
break free
, causing personal injury and property damage.
WARNING
The e
lectricity must be off while the electrical connections are made.
If not,
severe
personal injury or death
may occur
.
IMPORTANT NOTE
•
Observe all governing ordinances.
•
P
roperly ground
the oven
.
•
Do not block oven vents (bottom-front of the oven) or leave combustible or
heat-sensitive items in front of them.
