Dacor DISCOVERY DYF48BNDI, Инструкция по использованию и уходу, Страница: 5 / 20

3
1. Turn on the ice maker. Lower the wire shutoff arm as shown.
Please refer to page 6 for further instructions on the
operation of your ice maker.
NOTES :
„
Allow 24 hours to produce the first batch of ice.
„
Allow 3 days to completely fill the ice container.
„
Depending on your model, you may want to select the
maximum ice feature to increase the production of ice.
Before Use
Refrigerator Operation
Turning the Main Power Switch On/Off
If you need to turn the power to your refrigerator on or off,
you must remove the top grille assembly to access the power
switch. Turn the power to the refrigerator off when cleaning your
refrigerator or changing light bulbs.
Removing the Top Grille
1. Grasp both ends of the top grille.
2. Push the top grille straight up, then pull straight out. Lay the
grille on a soft surface.
Replacing the Top Grille
1. Insert the top grille hooks (located on the back of the top grille)
into the slots on the side trim.
2. Pull the grille down slightly to lock into place.
continued...
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
B
B
A
A. Top grille
B Cabinet side trim
Water System Preparation
Please read before using the water system.
IMPORTANT: After connecting the refrigerator to a water source
or replacing the water filter, fill and discard three full containers of
ice to prepare the water filter for use, before using the ice.
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used on
disinfected waters that may contain filterable cysts.
NOTE : If your model has a base grille filter system, make sure
the base grille filter is properly installed and the cap is in the
horizontal position.