14
Service Manual - Dishwasher Models DDW24S, RDW24I and RDW24S
Troubleshooting
Display
T1
T3
T4
T5
T2
T8
D1, 15,
D2, D3
Opening the service menu
P
START
Open the door, put the dishwasher in standby mode by pressing the main power switch (T8).
Activate the unit again by pressing the main power switchn (T8), press and hold the PROGRAM
selector (T1) and START (T2) for 5 sec. SERV will show on the display. When the service menu is
opened, the most recent error message is shown, F:XX. All error messages are erased by a total
reset. It is only possible to leave the service menu by pressing the START button. It is not possible
to leave the service menu by using the main power switch (T8).
START
Press the START button to navigate the menu system step by step.
PROGRAM
Press PROGRAM repeatedly to scroll between settings. Press PROGRAM to save the setting and
continue to the next menu step.
START
Press START at the last step of the menu to close the service menu and save the most recent set-
tings.
Menu step/Turn/Push Numeric Display Comments/instructions
START
PROGRAM
d:01
Mixer valve and inlet valve on (1 second delay between mixer
valve, if available, and inlet valve)
d:02
Inlet valve and mixer valve, if available, off for 1 second then inlet
valve on
d:03
Not used
d:04
Detergent/rinse aid dispenser
d:05
Circulation pump on
d:06
Circulation pump and heater on - max. 75°C (167°F)
d:07
Drain pump on
d:00
No components on
START
PROGRAM
P: 0
Normal water intake, default setting
P: 5
Water intake increases by +5%
P:10
Water intake increases by +10%
P:15
Water intake increases by +15%
L: 0
Time, flow meter switched off, intake time: pulse value x 0.068 [s]
L: 5
Time-controlled water intake increases by +5%
L:10
Time-controlled water intake increases by +10%
L:15
Time-controlled water intake increases by +15%
Service Menu - RDW24I and RDW24S
Diagnostics
Water intake