I
nsTallaTIon
I
nsTruCTIons
I
nsTallIng
The
C
offee
s
ysTem
In
The
C
abIneT
• Connect the power plug into the power receptacle.
• On the plumbed model (CM24PBISAS), connect the
water supply line. See page 8 for instructions.
• While supporting the coffee system from below,
insert it into the cabinet cutout. As you insert it into
the cabinet, line up the glides on the unit with the
cabinet glides. The system should glide on the rails
when slight pressure is applied to the front of the
coffee system. If it does not glide smoothly, check the
distance between the glides again.
• As you slide the coffee system into the cabinet the
locking tab on the guides will engage.
• Before the appliance touches the kitchen cabinet,
check that the safety brackets insert correctly into the
pins mounted behind the appliance’s cover. If they do
not, remove the machine and adjust the hooks up or
down, as needed. You may adjust the force exerted by
the safety brackets by adjusting the screws above and
below the metal balls.
I
f
y
ou
n
eeD
To
r
emoVe
The
C
offee
s
ysTem
f
rom
The
C
abIneT
Should the coffee system need to be removed from its
location:
• Disconnect the power plug from the power receptacle.
• Press the respective locking tabs on the guides and
remove the appliance, supporting it from below.
I
nsTallIng
The
s
afeTy
b
raCkeTs
In
The
C
abIneT
After installing the glides, their bases and before installing
the coffee system in the cabinet, apply the two safety
brackets (A) needed to hold the unit firmly within the
cabinet. The two safety brackets are fixed to the inside wall
of the cabinet cutout 7 7/8” from the support platform as
seen below. After finding the right position for the safety
brackets, attach them using the four screws provided.
7-7/8”
(200mm)
Safety Bracket Location
Side View
A
A
Locking Tab Location
