Dacor 36, Руководство по установке

Страница: 6 / 12

i
nsTallaTion
i
nsTRuCTions
d
ooR and
d
RaweR
R
emoval
WARNING
To avoid electrical shock which can cause severe personal
injury or death, observe the following:
• Disconnect power to refrigerator before removing doors or drawer.
Connnect power only after replacing doors or drawer.
Some installations require door/drawer removal to transport the
refridgerator to it’s final location.
CAUTION
To avoid damage to walls and flooring, protect vinyl
or other flooring with cardboard, rugs or other
protective material.
1. Unplug power cord from power source.
4. Unscrew 5/16” hex head screws from top
hinge to remove hinge and
retain all screws for later use.
5. Lift refrigerator door from center hinge
pin.
6. Remove plastic sleeve, if present.
Remove center hinge pin with a 5/16”
hex head driver. Retain hinge pin and
plastic sleeve for later use.
7. Remove Phillips screws to remove center
hinge and retain all screws for later use.
8. Remove bottom hinge or stabilizing
bracket with 3/8” hex head driver and
retain screws for later use. Lift out bottom
hinge pin (on freezer door models).
9. See drawer removal instructions.
p
ullouT
f
ReezeR
d
RaweR
DANGER
To prevent accidental child entrapment or suffocation risk, do
not remove the divider in the top freezer basket.
WARNING
To avoid electrical shock which can cause severe personal
injury or death, disconnect power to refrigerator before
removing doors. After replacing doors, connect power.
CAUTION
To avoid possible injury, product, or property
damage, you will need two people to perform the
following instructions
TO REMOvE:
1. Pull drawer open to full extension.
2. Tilt the lower basket forward and
lift to remove.
3. On each white drawer bracket
is a basket cradle with two snap
attachments. To release each
cradle, unlatch the snaps by
pushing them inward, away from
the side bracket. Lift the cradles
off of the rails.
4. Lift top of drawer front to unhook
the drawer from the slides. Lift door
front out to remove.
2. Remove toe grille and bottom hinge
cover(s).
3. Remove top hinge cover from refrigerator
door by removing Phillips
screw and retain screw and cover for
later use.