English
61
4.
Open the door fully. If it does not lie
perpendicular to the oven, remove the
door, and repeat Steps 1 – 3.
5. F
lip the
hinge locks up into the locked
position.(See
Removing the oven
doors
, Step 3,
graphic A, pg. 75.)
6.
Close the oven door
, and check the
gap
between
the door and control panel. If
one side
has a wider gap, the hinge on
that side
is improperly installed.
7.
Reconnect the LED wire harness.
CAUTION
To avoid damaging the wire, reinsert it
as
it was
before you removed the door.
Changing the oven light
The oven light is a standard, 40-watt appliance halogen bulb. It comes on automatically
when the oven door is opened. If the door is closed, touch
LIGHT
on the control screen
to turn the light on/off. You cannot turn the light on during a self-cleaning cycle.
1.
Remove power to the oven at the main
fuse or circuit breaker, and ensure the
oven and bulb are cool.
2. (S
upport the element
) T
urn the
circular
nut on the rear wall counter-clockwise.
The element loosens and
tilts down.
Important:
The broil element is not
removable. Do not force the element
down or let it drop.
3. Remove the glass cover and bulb cover.
4. Replace the bulb.
5. Re-install the covers, then hold the
broil element in its operating position,
and turn the nut clockwise to tighten.
