DIGITAL INDICATOR
550A
16
CHAPTER 6. SET-UP
6-1. SET-UP
●PREFACE
The meaning of “SET-UP” :
Is to choose each proper functions for matching of the indicator with the appliances of field.
▶How to enter into set-up mode
This set-up mode is required for proper weighing operation when indicator connect with other
appliance.
※if you press key “CREAR”at S&C mode, indicator will displays as following
▶Setting Method:
1) If you proceed to next function, press “CLEAR” key or if you want to see your desirous
any function number, press “CLEAR” key after input and function number by numeric key.
Indicator will displays function number directly from present function number.
※ Present display : “F01-01”
If you want to see function number12
Press numeric key “1 “and “2 “ → Press “CLEAR “KEY ” →”F12-XX” display
▶If you want to change each functional setting number newly, press “CAL” key after input
the functional setting number by numeric key
.
① ▶ Depress key “3 KEY” first and power on at the same time.
② At that time “TEST ” word will be displayed.
③ Depress key “3 KEY” again, and indicator will display as following:
“SET CAL” S & C mode
At this time, press “CLEAR” key.
Indicator will display to “F01-xx” from above “test ” message
.
E
E
E
X
X
X
▶Present Display : “F01-01”
① Press “CLEAR” Key → “F02-00” Display → Press “CLEAR” Key.
“F03-01” Display → Continuovsly press “CLEAR” key →
“F04-xx” → “F05-xx” →”F06-xx” →
Press “CLEAR” key in streams, the next function number will be displayed
E
E
E
X
X
X
