dacell DN-10, Руководство пользователя

Страница: 4 / 22

1. B
2. O
3. I
4. T
K
o
OP-03 : RS485
OP-04 : DAC Analog output
1-6. Power Supply
Power of this product did 220V(50~60Hz) with standard, 110V speaks when ordering,
1.7. Standard built-in product
ody
perating instructions
Terminal and Power Cable
he panel the parts for a fixation
2. Cautions
For optimum performance and safety, please read these instructions carefully.
Do not remodel this equipment at one's discretion.
2-1. Set-up Cautions
• Keep it out of wet places.
• Do not set it up near vibration & impulse, high temperature and humidity.
eep it out of the direct rays of the sun. Set it up where there is less dust, and Keep it
ut of direct air including salt and ion.
• Do not use when there is inflammable gas or heavy machinery, and smog.
• Ground earth-terminal(GN)
• Make wire separately from power system wiring and noise wiring.
• Make sure the use of 4 line sealed cable as a sensor cable. Too long cable leads to
measurement error due to wiring resistance.
2-2. Cautions
During calibration, Do not input free-load state and real-weight load until it becomes
stable. Pressing Enter Key in unstable condition leads to calibration error.
3
Do not press any Key in use at one's discretion. Please refer to 7. Setting-up mode for
the function and method of Key.