Installing and connecting
Connection
Connecting welding gun
and earth cables
Place cables without loops. Otherwise they can
severely heat.
Before connecting check if any of the cables are
damaged.
The equipment may only be connected to a checked CEE-sok-
ket with the necessary connected loads ->chapter »Technical
data«.
— Turn on/off switch to “0”.
— Check if cables, socket and plug are damaged.
— Connect equipment to the a.c.mains and secure plug.
We recommend to connect only licensed welding guns
by DABOTEK to the equipment. Welding guns by other
manufacturers can have a different allocation or polarity
and thus can destroy the equipment. If you connect
welding guns by other manufacturers we do not guaran-
tee the security and the proper performance of the stud
welding equipment.
The following items must be connected to the equipment:
The two earth cables
Welding gun cable with control cable
The welding gun is connected with a control cable and a thicker
cable for the welding current. Both cables have to be connected
to the equipment.
The plugs of the cables have got metal tappets. After plugging
secure the plug-in-connection by turning.
— Connect and secure welding gun cable with control cable
and earth cable.
Only when extending the welding gun cable
— Connect and secure welding gun cable with control cable
to the equipment.
— Connect welding gun cable with control cable to the
extension cable. Secure plug-in-connection by turning.
0,35
14
