English
English
10
Dabi Atlante Authorized Service
Network
Dabi Atlante Authorized Service
Dabi Atlante Authorized Service
Network
Network
Maintenance service for Dabi Atlante equipment
must be given by Dabi Atlante Authorized Technical
Assistance, otherwise warranty will be compromised.
Use the attached insert or access the website
www.dabi.com.br to find the nearest Dabi Atante
Authorized Technical Assistant.
Symbols
Symbols
Symbols
Use the icons below to identify the symbols on your
equipment:
Technical responsibility by
: Leonel Issa Halak – CREA-SP 0600256918
Equipment Warranty
Equipment Warranty
Equipment Warranty
This equipment’s warranty covers manufacturing faults
for a period of 12 months starting on the date of its sales
receipt issuance in the name of its first owner.
Reasons for warranty voidance:
•
Installation and/or operation in disagreement
with the instructions in this manual.
•
Falls.
Items that are not covered by warranty:
•
Technicians’ travel expenses and equipment
transportation expenses for technical assistance.
•
Damage to external finishing and/or accessories
that has not been caused by the manufacturer.
Note
In case technical assistance is required during the warranty
coverage period, the sales receipt must always be
presented to the technician providing such service.
Equipment will not cure
Fault
Cause
Solution
Equipment will not start
There is no power supply
LED is burned out
Obstruction of the light guiding tip
Await for power supply normalization
or call for technical assistance
Replace the head
Replace and clean it
Troubleshooting
Troubleshooting
Troubleshooting
“Fragile”
– Located on the packaging
side. It determines that equipment
must be carefully transported in order
to prevent falls or shocks.
“Protect against humidity”
– Located
on the packaging side. It determines
that the equipment must be protected
against any type of humidity during
transportation and storage.
“Maximum piling”
– Located on
the packaging side. It determines
the maximum number of boxes that
can be piled up during transportation
and storage.
“This side up”
– Located on the
packaging side. It determines that
the packaging must be handled by
keeping the side shown by the arrow
facing upwards.
“Temperature limit”
– It determines
the temperature limits at which
the equipment must be stored or
transported.
Final recommendations
Final recommendations
Final recommendations
In order to ensure greater durability for your
equipment, use only original Dabi Atlante
replacement parts, which are in accordance with
the technical standards and specifications required
by the manufacturer. Also, use only the services
provided by the Dabi Atlante Authorized Technical
Assistance Network as it counts on trained assistants
and specific tools for the appropriate maintenance
of your equipment.
Technical features
Technical features
Technical features
Voltage
Frequency
Power
Light Source
Light wavelength
Light intensity
Light guiding tip
ø 10 mm angle: 60°
Ultraled
100-240Vac
50/60Hz
10VA
460-490nm
>500mW/cm²*
*In the operation conditions specified on this Manual
Specification
