5
DESCRIPTION OF EQUIPMENT
General Description
Compact handpiece, ergonomic design, body made of metal with surface treatment. Rotor supported
on bearings providing a low noise level, speed adjustment in clockwise and counterclockwise
directions, adapts to any contra angle or straight piece handpiece in the INTRA system.
The Alliage handpieces have been planned to offer maximum performance in the most severe clinical
procedures. With a design which caters for ergonomics, torque, sensitivity and lightness. Produced
with technology (MADE IN BRAZIL) and material of the utmost durability.
Internal irrigation System (according to model acquired): without the need for adaptations, the
internal irrigation system allows direct passage of water flow to the counter angle or straight piece
with the power required for the formation of the spray.
To ensure safe operation of your equipment, use only the mounting assembly (chair, equip, water
unit and reflector) provided by Alliage Authorized Reseller Service.
Application specification
Alliage Dental Handpieces are designed to perform most routine dental procedures in intraoral
region treatments.
Operation principle
The Air motors operates by pneumatic pressure and has an Intra connection system to be used
with Low Speed Dental Handpieces.
Significant physical characteristics
The Air motors promotes shaft revolutions in the magnitude of 5,000 to 20,000 revolutions/minute
and has a torque of 0.350 - 1,000 N.cm. Under normal operating conditions, the equipment has a
compressed air consumption of 54 L/min and a water consumption of 42 mL/min.
User profile
Alliage Dental Handpieces can be operated and handled by users of both sexes, with the ability to
read and understand images, symbols, icons, western Arabic characters (Arial font), alpha numeric
characters, knowing how to distinguish intraoral part of the human body, not being able to present
a degree of visual imperfection for reading or seeing and an average degree of impairment of recent
memory, not being in a clear capacity to perform the activities and functions of the product in a
correct manner to the profession.
The user needs to be a qualified health professional and trained with technical competence in the
health and dentistry field.
