DAB DCONNECT BOX, Руководство пользователя

Страница: 67 / 148

ENGLISH
65
11.10 Example of DConnect Box Connection with e.sybox mini3
(Sw 2.X versions)
Initial Requirements:

Make sure that the product has a software version (Sw) 2.X or higher (see page VE of the pump
menu); if it is lower, e.g. “1.X”, a manual update is necessary, see section "Example e.sybox mini3
Update (Sw 1.X or previous versions)" of this manual.

DConnect Box already updated and powered, see section Updating the DConnect BOX of this
manual.

Manual of the product to be connected.
The connection between the e.sybox mini3 and the DConnect Box does not require any cable.
1. Make sure that the e.sybox mini3 and the DConnect BOX are powered.
2. Access the Installer menu, for 5 sec, and scroll to the page. AS
3. Press the button for 5 seconds until the blue LED under the e.sybox mini3 display
starts flashing.
4. Press the left button of the DConnect Box for 5 sec until you hear a beep and the wireless
connection icon starts flashing.
5. As soon as the connection is established, the same LED will remain on and the "DBox"
symbol will appear on the "AS" page of the e.sybox.
Note: DConnect Box and e.sybox mini3 are dissociated by holding down the right button
of the DConnect Box for 5 seconds, a beep sounds and the wireless connection icon
flashes once. This will delete all wireless connections in the DConnect BOX.
6. Start the DConnect DAB APP and proceed to configure the product.