ENGLISH
GB
32
12. MENUS
EVOPLUS circulators offer 2 menus:
user menu
and
advanced menu
.
The user menu is accessible from the Home Page by pressing and re-
leasing the central “Menu” button.
The user menu is accessible from the Home Page by holding down the
central “Menu” button for 5 seconds
Below are shown the
user menu
pages with which it is possible to check
the system status and modify its settings.
Instead on the
advanced menu
WKHUHDUHWKHFRQ¿JXUDWLRQSDUDPHWHUV
for communication with MODBUS systems (for further details visit the
link:
http://www.dabpump.com/evoplus
). To leave the advanced menu
you must scroll through all the parameters using the central button.
If the menu pages show a key at bottom left it means that it is not possible
to change the settings. To unblock the menus go to the Home Page and
press the hidden button and the button under the key at the same time
until the key disappears.
If no button is pressed for 60 minutes, the settings are automatically
blocked and the display switches off. When any button is pressed
the display lights up again and the “Home Page” appears.
To navigate in the menus, press the central button.
To return to the previous page, hold down the hidden button, then press
and release the central button.
To modify the settings use the left and right buttons.
7RFRQ¿UPWKHFKDQJHRIDVHWWLQJKROGGRZQWKH
central button “OK”
IRUVHFRQGV&RQ¿UPDWLRQZLOOEHLQGLFDWHGE\WKHIROORZLQJLFRQ
:
Home Page
The main settings of the system are graphically summed up
on the Home Page.
The icon at top left indicates the type of regulation selected.
The icon at centre top indicates the operating mode selected
(auto or economy).
The icon at top right indicates the presence of a single or
twin inverter. The rotation of the icon or indicates
which circulation pump is operating.
At the centre of the Home Page is a read-only parameter which
can be chosen from a small set of parameters on Page 9.0 of
the menu.
From the Home Page it is possible to access the page for regu-
lating the contrast of the display: hold down the hidden button,
then press and release the right button.
EVOPLUS circulators offer 2 menus: user menu and advanced
menu. The user menu is accessible from the Home Page by
pressing and releasing the central “Menu” button.
The user menu is accessible from the Home Page by holding
down the central “Menu” button for 5 seconds.
Page 1.0
The factory settings are set from Page 1.0 by holding down the
left and right buttons at the same time for 3 seconds.
7KHUHVHWWLQJRIWKHIDFWRU\VHWWLQJVZLOOEHQRWL¿HGE\WKHDS
-
pearance of the symbol next to the word “Default”.
