14
M Series Electrical Outlet Requirements
All models require a grounded, three prong electrical outlet rated for at least 15 amps. Each machine
is equipped with a power inlet which incorporates two 5x20mm fuses. M Series devices can be built
to meet any international electrical standard.
How to Position Yourself
The hands, feet or elbows should be placed through the arched exposure ports in the front shield and laid
directly on the plastic guard that covers the lamps. Intensity is highest towards the horizontal center of the
unit. Rings or other jewelry may cause scratching of the shield and should therefore be removed.
M Series Lamp Removal and Installation
1. Consult the Lamp Replacement Guide on page six (6) for replacement lamp specifications.
2. Unplug the machine and disconnect the power cord for the hood before removing the hood.
3. Remove the hood from the base. The hood lamps are then easily accessible on 120-volt units
if those are to be replaced.
4. To remove the lamps in the base, use a flat head screw driver to remove the screw at the back
of the unit that holds the acrylic shield in place.
5. Then slide the acrylic forward to remove it from the base.
6. Grasp the lamp to be removed with both hands and push it to the left until it clears the right
socket. Then remove the lamp. Reverse the process to re-assemble the unit.
7. Reset the lamp age hours to zero - see instructions on page twenty-two (22).
Note:
UVA lamps are always closest to the front in combination machines. In combination devices
the hood lamps are always UVA. Be sure to get the correct lamp type in the correct socket when
replacing lamps.
