DAAN Groups VOLTZ TOYS DG-81919, Руководство пользователя

Страница: 7 / 21

6
1. FRONT WHEEL ASSEMBLY
2. REAR WHEEL ASSEMBLY
Parts required: #3, #11, #12
Parts required: #4, #5, #11, #12
Start the installation with the engine in up-side-down position. Slide the
front wheel (no gear teeth) on to front axle, followed by wash. Secure the
connection with cotter pin, then place and secure the wheel cover. Repeat
for the other side.
Confirm the axle is sits in the centre. Slide the motor through the axle, con-
nect the power supply cable, then silde the motor into the engine body. Sit
back wheel into the motor, followed by washer, then secure the installation
with cotter pin. Place and secure the wheel cover. Flip the engine to normal
position after finished.
#11 #11
#11 #12 #3