6
Troubleshooting
Visit www.da-lite.com to find installation and troubleshooting
tutorials. You will also find a link to Live Chat for interactive
support.
You can contact us by email at [email protected] or by phone
at 800.622.3737 or 574.267.8101 with any additional
troubleshooting questions.
Symptom
Cause
Solution
Screen will not operate
and motor does not hum.
Incorrect line voltage.
Verify 115-125V (or 220-240V). If insufficient voltage, rewire
incoming electric line.
Blown fuse.
Replace fuse.
Tripped circuit breaker.
Reset circuit breaker.
No power to junction.
Check above. Tighten all loose wire connections.
Correct any improper connections.
Screen will not operate
and motor does not hum.
Power at junction box.
Thermal overload tripped.
Let motor cool down for 50 minutes. Try again.
Defective motor, limit switch or capacitor.
Replace motor assembly. NOTE: Motor is a sealed assembly.
Capacitor burned out.
Replace motor assembly.
Screen does not stop
at correct position.
Limit switch out of adjustment.
See Screen Adjustment section.
Noise.
NOTE: Screen will operate
with a low pitched hum.
Squeaking, rubber end plug rubbing on motor.
Center roller in case.
Grinding. Foreign object in screen
rubbing on roller or fabric.
Remove.
Gear noise.
Replace motor assembly.
Coasting.
Defective brake.
Replace motor assembly.
Fabric hangs crooked.
Screen not installed properly.
Check for level and plumb.
Fabric is damaged.
Replace fabric.
Содержание Wireline Advantage
Страница 1: ...INSTRUCTION BOOK FOR Wireline Advantage ...
Страница 7: ...7 ...