Figure 3
No
4. After the belt is in a suitable location for tightening, remove the adhesive
protectors from the Velcro hooks and place the belt over them.
5. Tighten the belt. Do not overtighten as this could result in damage to the TV.
Secure the loose end of the belt.
Operation of the Buckle type Belt
1. Thread the belt through the buckle as shown in Figure 4.
Figure 4
2. Do not twist the belt but do keep the loose end of the belt away from the TV
to make adjustments easier.
3. To tighten the belt, clasp the buckles together and pull on the loose end of
the belt. See Figure 5.
Figure 5
Pull To
Tighten
Clasp
Together
Press To
Release
4. To release the belt, squeeze the buttons on the sides of the buckle.
