Installation of Safety Belt
1. Attach the two 3” Velcro loop strips to the top surface of the TV with 2” on top
and 1” on the side. See Figure 1. Use the following guidelines to position the
strip.
a. Velcro strip to be on a flat surface parallel to the monitor’s base.
b. Velcro strip is the maximum distance from the front of the screen.
c. Place the Velcro strip to insure the safety belt, on the side of the TV, is
always parallel to the screen or slanted back from the top. See Figure 2.
Figure 1
Velcr
o L
oop
Adhesiv
e Strip
A
A
1"
2"
Figure 2
No
Yes
Yes
2. Apply the Velcro hook strip to the Velcro loop. Do
NOT
remove the adhesive
protector at this time.
3. Wrap the belt under the object the TV is resting on and around the TV.
Position the buckle so that it is located along the top or side, but not near a
corner of the TV or the object it is resting upon. See Figure 3. Loosely position
the belt.