Da-Lite Curved Multi Format Imager, Инструкция

Страница: 2 / 16

2
Tools Required for Installation
Important Safety Instructions
When using your video equipment, basic safety precautions
should always be followed, including the following:
1. Read and understand all instructions before
using equipment.
2. Close supervision is necessary when any appliance
is used by or near children. Do not leave appliance
unattended while in use.
3. Care must be taken as burns can occur from touching
hot parts.
4. Do not operate appliance if it has been dropped or damaged
until it has been examined by a qualified service technician.
5. To reduce the risk of electric shock, do not immerse this
appliance in water or other liquids.
6. The use of an accessory attachment not recommended
by the manufacturer may cause risk of fire, electric shock
or injury to persons.
Pre-Installation
The screen will arrive in three separate cardboard boxes. One
box will be very long and will house the 4.75” x 8.00” top and
bottom main frame parts, the 1.50” x 1.50” frame parts, hardware
and wall switch. The second cardboard box will house the 4.75” x
8.00” side main frame parts. The third cardboard box will house
the fabric for the Curved Da-Snap Screen.
Have space for this available on a flat clean surface such a large
table or floor. The work area should be larger than the frame size.
If the floor is used, clean papers should be spread to keep all dirt
from the screen surfaces. Do not use newspaper..
Phillips Screwdriver
1/8” Allen Wrench