D3D D3DONEPRO, Руководство по первоначальной настройке

Страница: 2 / 6

5: remove the protective film without using a cutter (warning)
6: remove the two (2) black cable zip ties remove the box located in the lower part of the 3D Printer
7: remove the box located in the lower part of the 3D Printer - WARNING!! If the box is too much tight
with the bed you can lift up the bed manually with barrel(move the box a bit in front/right and you can
touch down on the back) like the photo rotating it from left to right like clock rotation.