background image

5

4

Do not expose this product to rain or place it near water or in a wet environment (near a 

bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming 

pool etc.). If this product accidentally gets wet, unplug it and contact an authorized dealer 

immediately. 

This product uses batteries. In your community there might be regulations that require 

you to dispose of these batteries properly under environmental legislations. Please contact 

your local authorities for disposal or recycling information. 

Do not exceed the standard capacity of a multi-plug or power outlet extension when using 

it for this product. There is a danger of an electric shock or a fire hazard. 

To protect this apparatus from a lightning storm, or when it is left unattended and unused 

for long periods of time, unplug it from the electric outlet. This will prevent damage to the 

set due to lightning and/or power line surges. 

Use your common sense when operating this product. Never insert anything metallic into 

the open parts of this product. Doing so may result in an electric shock and/or serious 

injury. 

To avoid electric shock, never touch the inside of this product. Only a qualified technician 

should open this product. If there is a fault with this product do not attempt to fix it 

yourself; unless you are a qualified technician. 

Do not touch the power cord with wet hands. There is a danger of an electric shock. 

Plug the power cord firmly into the power outlet. Failure to do so may cause a fire hazard. 

Do not unplug the power cord by pulling the cable only. If the cord is damaged, it may 

cause an electric shock. 

If this product does not operate normally - in particular, if there are any unusual sounds or 

smells coming from it - unplug it immediately and contact an authorized dealer or service 

center. 

Be sure to pull the power plug out of the outlet if the product is to remain unused or if you 

are to leave the product for an extended period of time. Accumulated dust can cause an 

electric shock, an electric leakage or a fire by causing the power cord to generate sparks 

Getting Started  

and heat or the insulation to deteriorate.

Be sure to contact an authorized service center, when installing your product in a location 

with heavy dust, high or low temperatures, high humidity, chemical substances and where 

it operates continuously for 24 hours such as an airport, a train station etc. Failure to do so 

may cause serious damage to your product. 

Do not allow children to hang off the product or climb onto it. If it is mounted on a stand or 

onto a wall the extra weight may cause the product to tip or fall. 

Store the accessories (battery, bolts, screws etc.) in a location safely out of the reach 

of children. 

Do not install the product in an unstable location such as on a weak wall, a slanted floor 

or a location exposed to vibrations. If this product is to be mounted onto a wall, first check 

that the wall can hold the weight of the product safely. 

Do not drop or impart any shock to the product. If the product is damaged, disconnect the 

power cord and contact a service center immediately. 

As a precautionary measure please make sure that you pull out the power cord from the 

outlet before cleaning the product. 

Please take a common sense approach to installing and operating this product. 

Getting Started

Содержание IFTD T SERIES













Отзывы: