Powering the Pro Range
5.
d3technologies.com
Unit C+D, 127-129 Great Suff olk Street, London, SE1 1PP, UK. +44 (0)20 7234 9840
The d3 pro range uses the Neutrik powerCON TRUE1 as its power input. This mains connector is:
•
Lockable
•
Live-Mating (safely)
•
Extendable
•
Dust and water resistant according to IP65 in mated condition
To power the pro range you should use a cable with the following attributes:
•
SJT fl exible cord, min. 12AWG, min. 300V, min. 60ºC, max 4.5 m long
•
One end terminated with NEMA 5-15P/BS 1363/CEE 7 plug
•
Other end terminated with appliance coupler type Neutrik AG, type NAC3FX
Powering a Multi Server System
The d3 pro range features a power pass-through, making it possible to connect multiple systems.
The power input to the machine is rated at 12Amps RMS per connection in Europe and USA.
Loop through cables should have the following attributes:
•
SJT fl exible cord, min. 12AWG, min. 300V, min. 60ºC, max 4.5 m long
•
One end terminated with appliance coupler type Neutrik AG, type NAC3MX-W
•
Other end terminated with appliance coupler type Neutrik AG, type NAC3FX
True1 Powercon and Loop Through connections on rear of unit
Power cable daisy chain
