d2itsu CDV-46 Скачать руководство пользователя страница 27

Страница: 27 / 74

Wired Controller

CDV-46

5.2 COMMISSIONING

5.2.1 Set Master Indoor Unit

Under Off status, long press MODE button for 5s to set the corresponding

indoor unit of wired controller as master indoor unit. “MASTER” icon will be light

after finishing setting.

Note:

There is a master indoor unit in a system, other slave indoor units can be set

as master unit, in which case, the original master unit will become a slave

unit.

In one system, only one set of master indoor unit is allowed. If system detects

that there are several master units, it will designate the unit with the smallest

project number as a master unit.

5.2.2 Parameter Enquiry

Unit parameters can be checked in unit On or Off status.

(1) Long press “FUNCTION” button for 5s to enter the interface of viewing unit

parameters. “C00” is displayed in temperature zone and “CHECK” icon is light;

(2) Press “

” or “ ” button to select parameter code;

(3) Press “ENTER/CANCEL” button to return to last step until exits

viewing

parameters.

The parameter enquiry list is as following:

Содержание CDV-46











































































Результаты поиска

Содержание CDV-46

Отзывы:

d2itsu CDV-46, Руководство по установке и обслуживанию, Страница: 27 / 74

Результаты поиска

Содержание CDV-46

Отзывы: