d2itsu 3CSD3410, Руководство пользователя

Страница: 38 / 44

36
ENGLISH
Unit assembly
A. Single worm water tank
1- Build a high base of 8-10 cm of a suitable size for the water tank and place the tank on it.
2- Water connections:
The filter, the cut-off valve, the non-return valve and the safety valve must coincide with the diameter of the
cold water inlet pipe, and must be fitted in this order.
3-
Solar system line connections
Use a suitable valve and plumbing for the solar system inlet and outlet lines. If you have a circulation pump,
use one for the solar system circulation line. Fit a thermostat for the pump on the water tank instead of the
one already installed. You can thus control the temperature of the water used. You can adjust the temperature
as you wish with the thermostat. For the steam administration valve, the filter and the thermostatic
action valve must be connected on the inlet line, and the condensation collector of the valve must be connected
to the outlet line. A derivation valve must be connected on the steam inlet and outlet lines.
B. Double worm water tank
The cold water inlet line, the hot water outlet line, the radiator inlet and outlet line and the circulation line connections
of the installation must be connected following the instructions for installing the single worm water tank.
Use suitable valves and installation for connecting the solar energy systems.
Connect the circulation pump to the solar energy return line.
Always fit the safety valve between the non-return valve and the water tank.
Always use a valve of a dimension that coincides with the hot water outlet line.
WARNING!
NB: The worm must be placed on the first filling operation. In the other system, the worm must be emptied
and the air removed from the installation.
The customer must supply all the materials mentioned above, apart from the water tank.
WARNING!
Starting the water tank
TECHNICAL CHARACTERISTICS
MUInterAcusolEng 2/10/08 18:08 Página 36