© 2023
Step 3 of 5
Order #XXXXX
Locked layer contains
placeholder marks.
5
7
Counter Top
Floor
Pin
Pin
Pin
Pin
Shelf
Monitor
Mount
Infill
Infill
4
3
6
Bolt
4
1
2
6
8
Steps:
1) Attach [4] and [5] between [1] [2] and [3].
2) Slide floor between [1] [2] and [3] to rest on [4] and [5].
3) Insert pins into [1] [2] and [3] where shown.
4) Slide shelf between [1] [2] and [3] to rest on pins.
5) Slide infill between [2] and [3].
6) Attach [6] and [7] between [1] [2] and [3] to secure infill.
7) Lock counter top to [6]. See
Counter Top Lock
detail.
8) Attach [8] to counter top, using bolt.
9) Attach monitor mount to [8]. See
Monitor Mount
detail.
10) Attach monitor to mount then route monitor cord thru
conduit. See
Cord Management
detail.
Completed Assembly
*
Monitor Mount
V4 Connectors
*
Slide connectors into groove
of extrusion. Tighten set screws
to secure connectors in place.
Attach monitor mount back
plate to extrusion, using bolts.
Bolts
Monitor
Mount
Align hole with pin
Rotate pin. Spring
will push pin into hole.
Counter Top Lock
1
2
*
Pin
Hole
*
*
Cord Management
Route cord through conduit.
Attach conduit by pinching
the opening and inserting
into the groove of extrusion.
pinch
Cord
PR63 Conduit
Keep conduit attached to [
8
], when packing.
Item
1
2
3
4
5
6
7
8
Qty.
1
1
1
2
1
2
1
1
Description
38” GS210 Vertical Extrusion
38” S30 Vertical Extrusion
38” S30 Vertical Extrusion
18.8496” Z45 Curved Extrusion
21.7196” Z45 Curved Extrusion
18.8496” Z45 Curved Extrusion
21.7196” Z45 Curved Extrusion
36” S44 Vertical Extrusion
MOD-1561 Monitor Stand Assembly
