D16 Group TORAVERB2, Руководство пользователя

Страница: 11 / 37

11
www.d16.pl
Signal FlOw
•
BaSic mOduleS
Late reflections tab
This tab controls the Late reflections of the reverb.
Section controlling Late reflections’ tail
The following parameters can be selected:
• Size - Size of the room.
• Bass cut - controls the properties of the reflecting surface with respect to bass frequencies. Bass frequencies are cut below the value
selected. The range is from 0Hz to 22kHz.
• Feedback – Controls how much of wave energy is consumed every reflection. The less value the more energy consumes every
reflection, that means the feedback is weaker then.
• Attenuation - This parameter changes the characteristic of the reflecting surface - it’s damping properties.
• Diffusion – Is the reflecting surface’s ability to spread the echos out. If this parameter is set to Sharp , the reflecting surface is perfect-
ly flat and does not distort reflected waves. If this value is set to Smooth , the reflecting surface distorts the waves and spreads them
out into different directions.
• Modulation - This controls the late reflections delay lines modulation