D-Teg CP2-NA Скачать руководство пользователя страница 43

Страница: 43 / 45

Technical Support & Warranty

TECHNICAL SUPPORT

For Technical Support, please contact your local distributor.

LIMITED WARRANTY

This product is supplied with 1 year warranty. The Warranty excludes products

That have been misused, (including accidental damage) and damage caused by

normal wear and tear. In the unlikely event that you encounter a problem with

this product, it should be returned to the place of purchase.

FCC Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

The antenna(s) must be installed such that a minimum separation distance of at

least 20 cm is maintained between the radiator (antenna) and all persons at all

times. This device must not be co-located or operating in conjunction with any

other antenna or transmitter.

Содержание CP2-NA














































Результаты поиска

Содержание CP2-NA

Отзывы:

Похожие инструкции для CP2-NA

Бренды по названию

Популярные бренды

D-Teg CP2-NA, Руководство пользователя

Результаты поиска

Содержание CP2-NA

Отзывы:

Похожие инструкции для CP2-NA

Бренды по названию

Популярные бренды