11
FUNCTIONS
G-Sensor Calibration
1. Install the unit and park the vehicle on a flat surface .
2. Turn on the unit and press the small red button three seconds.
3. Then calibration will be done with “beep” sound.
Built-in power backup (Super Capacitor)
When power to the unit is interrupted, CP2-NA creates the last
file using the internal Super Capacitor.
Time and Date
There are no time and date settings as the CP2-NA get’s this information from the
GPS satellite's.
SD Memory Card Format
Please format [initialize] the SD card using the “Configuration Tool CP2-NA”
software.
G-Sensor Calibration is needed after installing the CP2-NA.
Power off vehicle and take out SD memory card
Turn off the power and then check the BLUE LED light. Once the LED light
is not on, you can now safely remove the SD memory card.
Safely Removal SD Card
