16
BACKLIGHT
When there is a strong backlight behind the object, clear images of the background as well
as the object can still be obtained by using the BLC or HLC function.
①
OFF
: Not being used
②
BLC
You have to select desired area from a picture to run BLC function in advance and then
can see the area more clearly.
• AREA SEL – Can select areas up to 2 area
• ARA STATE – if STATE is ON, BLC function operates
• GAIN – Adjust GAIN of BLC area.
(LOW, MIDDLE, HIGH)
• HEIGHT – Adjusting height of up-down in BLC area
• WIDTH – Adjusting left-right width in BLC area
•LEFT/RIGHT - Moving left-right in BLC area.
•TOP/BOTTOM – Moving up-down in BLC area.
BLC ON BLC OFF
③
HLC
If there is a high light where camera was installed in a certain place such as parking
garage or gas station, removing the high light makes it possible to view car plate.
•LEVEL: 1~255
•MODE: ALL DAY / NIGHT OMLY
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW
BACKLIGHT OFF
DAY& NIGHT COLOR
DPC
SPECIAL
RESET
EXIT
BLC
AREA SEL. AREA1
ARA STATE ON
GAIN MIDDLE
HEIGHT IIIIIIIIIIIIIIIIIIIII 3
WIDTH IIIIIIIIIIIIIIIIIIIII 4
LEFT/RIGHT IIIIIIIIIIIIIIIIIIIII 2
TOP/BOTTOM IIIIIIIIIIIIIIIIIIIII 3
RETURN RET
