www.dmail.eu
Useful and Unique ideas
Peephole lens
Base flange
Peephole barrel
Peephole viewer
Cod. 295750
PEEPHOLE VIEWER
Please read carefully this instructions manual before use. Save this manual for
any future case. Easy to use!
EXPLODED VIEW
Insert peephole lens in the outside of the door.
Insert the peephole barrel through base flange and insert both into the hole
on the inside of the door. Tighten the peephole barrel with your fingers.
Rotate the peephole viewer clockwise until horizontal and you feel it locked
in place.
Hold the peephole viewer at a 25-degree counter-clockwise position and
insert it onto base flange.
Then, insert the flexible flat cable (with the side showing the white line
facing up) into the cardshoot of the interface connector B. Press tightly the
cable to the connector to avoid the cable from coming off.
Make sure that the side of the flexible flat cable that shows the white line
faces up. Put your fingers on the two ends of the end piece (cardshoot) of
the interface connector B, and then pull the cardshoot outward.
Use the tightening tool included to tighten the peephole barrel.
When the barrel is snug, rotate the base flange until the TOP icon is at 12
o’clock (vertical)
USER MANUAL
The warranty is valid for normal use of the device as defined in the user’s guide.
Excluded from this warranty, damage due to a cause unrelated to the device. In particular, the warranty
does not apply if the unit has been damaged following a collision or a fall, a false move, a connection that
does not comply with the instructions or requirements specified in this manual, the effect of lightning
overvoltage sector, inadequate protection against heat, moisture or frost.
This warranty gives you specific rights, and you may also have other rights that vary from state to state.
If for any reason this product needs to be returned to the store where purchased it must be packed in its
original carton/package.
The manufacturer and distributor has the right to modify the apparatus (technically and aesthetically) and/
or replace some parts, whereas necessary, to always offer a safe and reliable product.
WARRANTY
Imported By: EL-PRO elettronica progetti srl · Corso dei Tintori 21 · 50122 · Firenze · Italy
·
Made in China
1
2
3
4
5
7
Flexible flat cable
Interface connector B
6
Door
COMPOSITE IMAGE
