D-Link xStack Скачать руководство пользователя страница 159

Страница: 159 / 357

xStack

DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch

148

Parameter Description

MSTI ID

Enter a number between

and

to set a new MSTI on the Switch.

Type

Create

is selected to create a new MSTI. No other choices are available for this field when

creating a new MSTI.

VID List (1-4094)

This field is used to specify the VID range from configured VLANs set on the Switch. Supported
VIDs on the Switch range from ID number

4094

Click

Apply

to implement changes made.

To configure the settings for the CIST, click on its hyperlinked name in the

MST Configuration Identification

window, which

will reveal the following window to configure:

Figure 3 - 47 Instance ID Settings window (CIST modify)

The user may configure the following parameters to configure the CIST on the Switch.

Parameter Description

MSTI ID

The MSTI ID of the CIST is

and cannot be altered.

Type

This field allows the user to choose a desired method for altering the MSTI settings. The user has
2 choices.

Add VID

– Select this parameter to add VIDs to the MSTI ID, in conjunction with the VID List

parameter.

Remove VID

– Select this parameter to remove VIDs from the MSTI ID, in conjunction with the

VID List parameter.

VID List (1-4094)

This field is used to specify the VID range from configured VLANs set on the Switch. Supported
VIDs on the Switch range from ID number

4094

. This field is inoperable when configuring the

CIST.

Click

Apply

to implement changes made.

To configure the parameters for a previously set MSTI, click on its hyperlinked MSTI ID

number, which will reveal the following

window for configuration.

Figure 3 - 48 Instance ID Settings window (modify)

Содержание xStack






































































































































































































































































































































































Результаты поиска

Содержание xStack

Отзывы:

Бренды по названию

Популярные бренды

D-Link xStack, Руководство пользователя

Результаты поиска

Содержание xStack

Отзывы:

Бренды по названию

Популярные бренды