background image

xStack DGS-3400 Series Fast Ethernet Switch 

Intended Readers 

The 

xStack DGS-3400 series Manual 

contains information for setup and management of the Switch. This manual is 

intended for network managers familiar with network management concepts and terminology.  

Typographical Conventions 

Convention    

Description 

[ ] 

In a command line, square brackets indicate an optional entry. For example: [copy 
filename] means that optionally you can type copy followed by the name of the file. 
Do not type the brackets. 

Bold font 

Indicates a button, a toolbar icon, menu, or menu item. For example: Open the 

File

 

menu and choose 

Cancel

. Used for emphasis. May also indicate system 

messages or prompts appearing on screen. For example: 

You have mail

Bold

 

font is also used to represent filenames, program names and commands. For 
example: 

use the copy command.

 

Boldface Typewriter 
Font 

Indicates commands and responses to prompts that must be typed exactly as 
printed in the manual. 

Initial capital letter

 

Indicates a window name. Names of keys on the keyboard have initial capitals. For 
example: Click Enter. 

Italics 

Indicates a window name or a field. Also can indicate a variables or parameter that 
is replaced with an appropriate word or string. For example: type

 filename

 means 

that the actual filename should be typed instead of the word shown in italic. 

Menu Name > Menu 
Option

 

Menu Name > Menu Option

 Indicates the menu structure. 

Device > Port > Port 

Properties

 means the Port Properties menu option under the Port menu option 

that is located under the Device menu. 

Notes, Notices, and Cautions 

 

 

NOTE

 indicates important information that helps make better use of the 

device. 

 

 

NOTICE 

indicates either potential damage to hardware or loss of data 

and tells how to avoid the problem. 

 

  

 

CAUTION

 indicates a potential for property damage, personal injury, or 

death. 

 

     

viii 

Содержание xStack DGS-3427























































































































































































































































Отзывы: