xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
484
DGS-3450:admin# download firmware_fromRCP src_file /home/DGS-XXXX.had
Command: download firmware_fromRCP src_file /home/DGS-XXXX.had
No RCP Server IP Configured.
Would you like to specify a RCP Server IP
?
(N) 172.18.211.106
No RCP Server Username Configured
Would you like to specify a RCP Server Username
?
(N) rcp_user
Connecting to server................... Done.
Download firmware...................... Done. Do not power off!
Please wait, programming flash......... Done.
Saving current settings to NV-RAM...... Done.
Please wait, the switch is rebooting...
DGS-3450:admin#
To download firmware from RCP without specifies the RCP Server and remote user, and the global RCP server was not
configured:
DGS-3450:admin# download firmware_fromRCP src_file DGS-XXXX.had
Command: download firmware_fromRCP src_file DGS-XXXX.had
No RCP Server IP configured.
Would you like to specify a RCP Server IP?(N)
RCP: copy file aborted!
Fail!
DGS-3450:admin#
To download DGS-XXXX.had from Global RCP Server and save with default file path & name:
DGS-3450:admin# download firmware_fromRCP src_file DGS-XXXX.had
Command: download firmware_fromRCP src_file DGS-XXXX.had
Using RCP Server IP: 172.18.212.106
Using RCP Server Username : rcp_user
Connecting to server................... Done.
Download firmware...................... Done. Do not power off!
Please wait, programming flash......... Done.
Saving current settings to NV-RAM...... Done.
DGS-3450:admin#
download cfg_fromRCP
Purpose
Download configuration file from the RCP server.
Syntax
download cfg_fromRCP [{username <username 15>}{<ipaddr>} {src_file}
<path_filename 64> |rcp: <string 128>] {config_id <int 1-2>}
Description
This command is used to download a configuration file from an RCP server.
Parameters
username
- The remote user name on the RCP Server.
ipaddr
- The IP address of the RCP server.
path_filename
- The pathname specifies the pathname on the RCP server or local RCP
client.