xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4# config ssh server maxsession 2 contimeout 300 authfail 2
Command: config ssh server maxsession 2 contimeout 300 authfail 2
Success.
DGS-3400:4#
show ssh server
Purpose
Used to display the SSH server setting.
show ssh server
Description
This command allows you to display the current SSH server setting.
Parameters None.
Restrictions None.
Syntax
Usage Example:
To display the SSH server:
DGS-3400:4# show ssh server
Command: show ssh server
The SSH server configuration
SSH Server Status : Disabled
Max Session : 8
Connection timeout : 120
Authfail attempts : 2
Rekey timeout : never
Listened Port Number : 22
DGS-3400:4#
config ssh user
Purpose
Used to configure the SSH user.
Syntax
config ssh user <username> authmode [hostbased [hostname
<domain_name> | hostname_IP <domain_name> <ipaddr>] |
password | publickey]
Description
This command allows you to configure the SSH user authentication
method.
<username>
- Enter a username of no more than 15 characters to
identify the SSH user.
authmode
– Specifies the authentication mode of the SSH user
wishing to log on to the Switch. The administrator may choose
between:
hostbased
– This parameter should be chosen if the user wishes to
use a remote SSH server for authentication purposes. Choosing this
parameter requires the user to input the following information to
identify the SSH user.
hostname <domain_name>
- Enter an alphanumeric string of up to
32 characters identifying the remote SSH user.
hostname_IP <domain_name> <ipaddr>
- Enter the hostname and
the corresponding IP address of the SSH user.
password
– This parameter should be chosen if the user wishes to
use an administrator defined password for authentication. Upon
entry of this command, the Switch will prompt the user for a
Parameters
215
