2
Connecting The DI-824VUP 2.4GHz Wire-
less VPN Router To Your Network
A.
First, connect the power adapter to the
receptor
at the back panel of the
DI-824VUP and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED lights up indicating proper operation. (Fig. A)
(Fig. A)
B.
1. Power off your Cable or DSL modem; the devices that do not have a on/off
switch and will require you to unplug the power adapter. Now, the DI-824VUP
should be powered on and the Cable / DSL modem should be turned off.
Cable / DSL modem (
Power Off
) – DI-824VUP (
Power On
) (Fig.B)
2.Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL
modem. After the Ethernet cable is securely connected, power on the Cable / DSL
modem by turning on the unit or plugging in the power adapter.
Cable / DSL modem (
Power On
) – DI-824VUP (
Power On
)
3. Insert the other end of the Ethernet cable to the WAN PORT on the back panel
of the DI-824VUP. The WAN LED light will illuminate to indicate proper
connection. If the WAN LED is not illuminated, please go back to step B1 and
repeat the steps. (Fig.C)
(Fig. B)
Содержание Wireless VPN Router DI-824VUP
Страница 17: ...17 Notes ...
