49
Using the Configuration Menu
Advanced > Routing
Static routes can be added if
you require specific routes
within your internal network.
These routes will not apply to
the WAN (Internet) network.
Enable
Select this option for the specified static route to take effect.
Hop Count -
In a transmission path, each link is terminated at a network device
such as a router or gateway. The number of hops equals the number of routers or
gateways that data must pass through before reaching the destination.
Dynamic Routing Settings allow the VPN Router to route IP
packets to another network automatically. The RIP protocol is
applied, and broadcasts the routing information to other routers
on the network regularly.
Dynamic Routing
RIP v1
Protocol in which the IP address is routed through the internet.
RIP v2
Enhanced version of RIP v1with added features such as Au-
thentication, Routing Domain, Next Hop Fowarding, and Subnet-
mask Exchange.
Destination
Enter in the IP of the specified network that you want to
access using the static route.
Subnet Mask
Enter in the subnet mask to be used for the specified net
work.
Gateway
Enter in the gateway IP address to the specified network.
Hop
Enter in the amount of hops it will take to the specified
network.
By default, it is set to disable. Check to enable (RIPv1 / RIPv2)
protocol.
