49
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual
Section 3: Configuration
On this page you can configure your camera to record video to an inserted microSD card. Click
Format
to format the SD card
(note that this will overwrite all current data on the card). Click
Schedule Record
to only save footage at set times. Click the blue
square at the bottom of the screen and then click the schedule to indicate when you would like recordings to be stored. Click
Save
to save your recordings from the microSD card.
Schedule
Record
Post-Event
Record
Record Rule
Stream Name
Scheduled
Motion
Detection
Toggle this to enable scheduled recording.
This setting allows you to set the length of time to delay before taking a
post-event snapshot. You can enter a value between 1 and 86400 seconds.
Indicate whether the camera should continuously record and overwrite old
data (
Cycle Store)
or save video for a set number of days (
Save Days)
. If this
option is selected, enter the number of days in the field below.
Select the stream to record.
Click the schedule at the bottom to specify a schedule to enable motion
detection.
Event Management / SD Card
