D-Link Vectra VEi7, Руководство по установке

Страница: 23 / 34

9 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter
Microsoft Windows NT 3.51 Workstation
9 Installing the D-Link DFE-500TX ProFAST Ethernet PCI
Adapter
Microsoft Windows NT
3.51 Workstation
Connecting to a
Windows NT 3.51 Server Requirements
• HP Vectra with Windows NT 3.51 Workstation.
• D-Link DFE-500TX ProFAST 10/100 PCI Ethernet adapter and driver
disk version 971201.
• Driver: DLKPCI.SYS, version 4.22.1
• Microsoft Windows NT 3.51 Workstation media.
• Microsoft Windows NT 3.51 Service Pack 5.
• Microsoft Windows NT 3.51 Server system that supports NetBEUI,
NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS transfer
protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off, install the D-Link DFE-500TX network
adapter into a PCI slot.
2 Connect network cable media to the D-Link DFE-500TX network adapter.
3 After Windows loads, go to the “MAIN” program group, and double-click
on “Control Panel”.
4 Select the “Network” icon, and click “YES” to install NT networking.
5 Insert the Windows NT Workstation CD.
6 In the “Windows NT Setup”, set path to your NT files.
7 Click on the “Do Not Detect” button from the “Network Adapter Card
Detection” dialog box, and click on “Continue” in the second “Network
Adapter Card Detection” dialog box.
Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8
Interrupt 09 03 10
I/O Address 1400 DC00 E400