D-Link Vectra VEi7, Руководство по установке

Страница: 13 / 34

5 Installing the D-Link DFE-500TX ProFAST PCI Ethernet Adapter
Microsoft Windows NT 4.0 Workstation
5 Installing the D-Link DFE-500TX ProFAST PCI Ethernet
Adapter
Microsoft Windows NT
4.0 Workstation
Connecting to a
Windows NT 3.51 Server Requirements
• HP Vectra with Windows NT 4.0 Workstation.
• D-Link DFE-500TX ProFAST 10/100 PCI Ethernet adapter and driver
disk version 971201.
• Driver: DLKPCI.SYS, version 4.22.1
• Microsoft Windows NT 4.0 Workstation media.
• Microsoft Windows NT Service Pack 4 media.
• Microsoft Windows NT 3.51 Server system that supports NetBEUI,
NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network
protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off, install the D-Link DFE-500TX network
adapter into a PCI slot.
2 Connect network cable media to the D-Link DFE-500TX network adapter.
3 Power on the system and log into Windows NT with administrator
privileges.
4 Open the “Network Properties” window and agree to install “Windows NT
Networking”.
5 With “Wired to the Network” checked, click on “Next”.
6 Click on the option to “Select from list” then on “Have Disk”.
7 Insert the D-Link DFE-500TX driver disk into the floppy drive.
Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8
Interrupt 10 03 10
I/O Address 1400 DC00 E400