background image

95

DCS-950G User’s Manual 

D-Link Systems, Inc.

Warranty

Disclaimer  of  Other Warranties: 

EXCEPT  FOR THE  LIMITED WARRANTY  SPECIFIED  HEREIN, 

THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER 
INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE 
DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED 
WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER 
THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION 
AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.

Limitation of Liability: 

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE 

UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE 
THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY 
CHARACTER, WHETHER  DIRECT,  SPECIAL,  INCIDENTAL  OR  CONSEQUENTIAL  (INCLUDING, 
BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, 
WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT 
OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF 
INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT 
RETURNED  TO  D-LINK  FOR  WARRANTY  SERVICE)  RESULTING  FROM  THE  USE  OF  THE 
PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS 
LIMITED WARRANTY,  EVEN  IF  D-LINK  HAS  BEEN  ADVISED  OF THE  POSSIBILITY  OF  SUCH 
DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS 
REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT.  
THE MAXIMUM  LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE 
PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN 
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES 
OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY.

Governing Law

:  This Limited Warranty shall be governed by the laws of the State of California. Some 

states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how 
long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited 
warranty provides specific legal rights and the product owner may also have other rights which vary 
from state to state.

Trademarks:  

D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered 

trademarks are the property of their respective manufacturers or owners. 

Copyright Statement

:  No part of this publication or documentation accompanying this Product may be 

reproduced in any form or by any means or used to make any derivative such as translation, transformation, 
or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the 
United States Copyright Act of 1976.  Contents are subject to change without prior notice.  Copyright

©

 

2002 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.

CE Mark Warning:  

This is a Class B product. In a domestic environment, this product may cause radio 

interference, in which case the user may be required to take adequate measures.

Содержание SECURICAM Network DCS-950G


































































































Отзывы: