48
Local Services Properties
Local Services Properties
Local Services Properties
Local Services Properties
Local Services Properties
Change local service properties
From the Configuration Control Panel, Local Services tab, double-click the service
name.
Make the changes by selecting or clearing the appropriate boxes and click the OK
button.
The service properties that may be changed are:
•
Startup - when enabled, starts the service when Bluetooth for Windows
initializes. The default setting is enabled. If Startup is not enabled the service
can still be started manually.
•
Authorization - when enabled, requires confirmation by the server operator
before a remote device is allowed to connect to this service. The default
setting is disabled. Authentication (see below) is automatically enabled when
Authorization is enabled.
•
Encryption - when enabled, encrypts data exchanged by the Bluetooth server
and the Bluetooth client. The default setting is disabled. Encryption applies to
the Bluetooth connection ONLY. Data transmitted to/from a modem, Local
Area Network, etc., is NOT affected by this setting.
Authentication is automatically enabled when Encryption is enabled.
•
Authentication - when enabled, requires that the client and server exchange
a passkey or Link Key before a connection is established. The default setting
is disabled. Devices are paired automatically when authentication is
complete.
•
Service Name - Enter a service name (one to 99 alphanumeric characters) in
this field. In most cases the default service name will serve. However, in
environments where there is more than one device of the same type or one
device provides more than one service of the same type (this is only possible
for the Bluetooth Serial Port service), the service name can be customized.
Содержание PersonalAir DBT-120
Страница 1: ...2 Rev 2 0 08 27 2002 DBT DBT DBT DBT DBT 120 120 120 120 120 Bluetooth USB Adapter ...
Страница 3: ...4 ...
Страница 12: ...13 Service icons for Windows 98SE 2K and ME ...
Страница 61: ...62 ...
